none
Could not find schema information for the element 'http://schemas.microsoft.com/.NetConfiguration/v2.0:system.serviceM

    Question

  • using CTP bits i can rebuild the samples and all ok - building my own project i get the following error:

    "Could not find schema information for the element 'http://schemas.microsoft.com/.NetConfiguration/v2.0:system.serviceModel'. C:\Documents and Settings\jim\My Documents\Visual Studio 2005\Projects\msnsearchclient\MSNsearchIndigo\app.config 3 6 MSNsearchIndigo"

    ????

    all of this is using VS 2005 beta2.

    jim
    Tuesday, October 04, 2005 12:52 PM

Answers

All replies

  • Hi Jim. Let's try something first: I often get this error when there's something wrong with my code, but the schema errors end up appearing first in the build window. When you have this, scroll through the entire list of warnings and errors and look for a coding error; if you have some fix them and see if the problem recurs.

    If not, let us know. Cheers, Ralph

    • Proposed as answer by RohitRaman Thursday, May 05, 2011 2:20 PM
    Wednesday, October 05, 2005 6:01 PM
  • Sounds like you will also need to install the Visual Studio 2005 Extensions for WCF.

    http://www.microsoft.com/downloads/details.aspx?familyid=EDE1A645-2A53-42E1-8482-3BF1FADADE06&displaylang=en

    This will update DotNetConfiguration.XSD for WinFX.
    Wednesday, October 05, 2005 7:56 PM
  • tried that but did not find any code errors...
    thx,
    jim
    Friday, October 07, 2005 6:54 PM
  • thanks - i've tried that numerous times and the extensions installer keeps complaining that WCF is not installed (yet i can rode sample code that depends on WCF)....so that certainly could be the problem - but the fact that some samples rebuild cleanly makes me wonder what is really going on.
    jim
    Friday, October 07, 2005 6:56 PM
  • Is this a warning or an error?

    In short, are you blocked by this?

    Sunday, October 09, 2005 5:30 AM
  • it exits the install w/o progress so i assume it is an error. there's nothing in any of the event logs that i can find related to it however.
    thx,
    jim
    Sunday, October 09, 2005 10:54 PM
  • Could you uninstall winfx and company and try it again?
    Monday, October 24, 2005 4:49 AM
  • The warnings are caused by a line in web.config:

    <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">

    Remove the xmlns part so it is:

    <configuration>

    The warnings will not show up.  The "xmlns" part is added when you use Web Site Administration Tool.

    Friday, December 16, 2005 8:11 PM
  • hi jim

    i also got erros around 'http://schemas.microsoft.com/.NetConfiguration/v2.' - just after un- and re-installing Framework 2.0 on a W2K Server. in my case i have forgotten to re-configure my webserver to ASP.NET version 2.0 (1.x is the default). after this change (IIS managment console - "your webserver" - properties - asp.net - asp.net version) everything was ok.

    god luck, simon

     

    Tuesday, December 20, 2005 7:13 PM
  • I get the following message when I try to use the below configuration. I tried taking out the xmlns and got a real error. What am I doing wrong?? HELP!!!!

    <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">

     

    Message 1 Could not find schema information for the element 'http://schemas.microsoft.com/.NetConfiguration/v2.0:configuration'. C:\Inetpub\wwwroot\Data Source\kpmemorabilia.com\web.config 10 2 C:\...\kpmemorabilia.com\

    Thursday, January 05, 2006 9:38 PM
  • For one thing, the address http://schemas.microsoft.com/.NetConfiguration/v2.0 does not exist.

    Will MS fix this
    Friday, January 06, 2006 3:55 AM
  • It's not broken.  A namespace URI doesn't have to exist as such, it's just a unique identifier.
    Tuesday, January 10, 2006 7:45 AM
  • Hi Jim,

    I had exactly the same problem but it was just a warning and the real problem was with the output.cs file created by the svcutil.exe for the client that I added to the project.  It did not recognize System.Runtime.Serialization.DataContractAttribute, etc. because I only added a reference to the System.ServiceModel.dll but it also needed a reference to System.Runtime.Serialization.dll before it would compile.

     

    Friday, June 02, 2006 6:14 PM
  • I've been banging my head against this Atlas *** since the Orlando VSLive conference and I just can't get it to work. Until it's a helluva lot easier than all this to code Atlas, then AJAX will continue to own Web 2.0.

     

    Tuesday, June 27, 2006 7:27 PM
  • If it's not broken, then how about MS fixing Visual Studio so that it doesn't report errors around it then?
    Monday, April 16, 2007 1:06 PM
  •  Piotr K. wrote:

    The warnings are caused by a line in web.config:

    <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">

    Remove the xmlns part so it is:

    <configuration>

    The warnings will not show up.  The "xmlns" part is added when you use Web Site Administration Tool.

     

    I think this is the correct answer to the problem... it also affects intellesense inside of the web.config file if you leave the xmlns reference inside of your web.config. (Makes it hard to configure things you don't use often... eh?)

    Friday, June 15, 2007 5:32 AM
  • What is the purpose of "xmlns" for the WSA Tool to add it?

     

    Thursday, June 28, 2007 12:35 AM
  • In my case, Im trying to register new elements into the web.config, using VS 2005. The messages which Ive received are like yours. But they are warnings ( I ) not errors ( X ). I have corrected the errors which were following bellow the warnings and so everything is OK.

    Thursday, August 16, 2007 2:38 PM
  • I just installed Ajax and got this schema error stuff - sure enough, you were right on! At the bottom of my error list was a coding error! All is now well - at least for the moment!

    Thanks, Ralph!

     

    Friday, September 07, 2007 9:37 AM
  •  

    Well, I ran into the same issue and it turned out security patches reset our IIS server to 1.1 and cleared out the 2.0 extensions and configuration. We reset everything back to 2.0 and things were back in business.
    Thursday, October 11, 2007 4:51 PM
  • At the bottom of my list were two coding errors -- both in the generated Reference.vb file.  Simple syntax errors

     

    how can I fix an error like this in generated code?  I mean, certainly I can do something, but what's the point when I don't have control over the generator...

     

    this is the error message:

    'Results' is already declared as 'Private Dim results() As Object' in this class.

    On this code

            Public ReadOnly Property Results() As CopyResult()
                Get
                    Me.RaiseExceptionIfNecessary
                    Return CType(Me.results(1),CopyResult())
                End Get
            End Property

     

     

     

     

    Thursday, January 17, 2008 7:58 PM
  • I installed SP1 for .Net2.0 framework and got an error.  Then ended up re-installing Framework 2.0 and then the service pack.  Every site defaulted back to 1.x so thanks for the post to go back and select 2.0.

    Wednesday, April 23, 2008 4:11 PM
  • Remove the <System.webserver> from the web.config file... it shud work

    Monday, August 11, 2008 3:59 AM
  • Ralph, your suggestion worked for me. Thanks!
    Thursday, May 05, 2011 2:24 PM
  • Hi Jim. Let's try something first: I often get this error when there's something wrong with my code, but the schema errors end up appearing first in the build window. When you have this, scroll through the entire list of warnings and errors and look for a coding error; if you have some fix them and see if the problem recurs.

    If not, let us know. Cheers, Ralph


    It worked to me.

    "passei por aqui..."


    • Edited by _allan_ Tuesday, January 07, 2014 12:07 PM
    • Proposed as answer by _allan_ Tuesday, January 07, 2014 12:07 PM
    • Unproposed as answer by _allan_ Tuesday, January 07, 2014 12:07 PM
    Tuesday, January 07, 2014 12:06 PM