none
.NET Framework version 3.5 Service Pack 1

    Question

  • Hi, I have this problem when I try to install .NET Framework version 3.5 Service Pack 1
    I currently only have Microsoft .NET Framework 3.5 installed
    and I can't install the uppdate from windows update:
    security upgrade Microsoft.NET Framework 3.5 ServicePack 1 och .NET Framework 3.5 (KB951847) x86 - but I think it's becuas I dont have service pack 1, so I can I install it?

    This is the code I get when I am trying to install the ServicePack 1:
    [10/11/09,15:06:30] Microsoft .NET Framework 2.0SP1 (CBS): [2] Error: Installation failed for component Microsoft .NET Framework 2.0SP1 (CBS). MSI returned error code 34
    [10/11/09,15:06:32] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.
    Sunday, October 11, 2009 6:56 PM

Answers

  • Hello,

    Windows Vista (all editions) includes the .NET Framework 2.0 and 3.0 as OS components, so usually it is not necessary to install them separately.

    You may try other steps I mentioned above. As you mentioned your OS is vista, you may first verify that you have turned on the windows feature of .net Freamework. (Please go to Control Panel -> Programs and Features -> Turn Windows features on or off -> Check the box next to Microsoft .NET Framework, then click Ok). Then reinstall. If the problem still exists.

    If the issue still exists, use Verification Tool to verify .Net Framework 2.0, 3.0, 3.5.(The .NET Framework 3.5 is an add-on that requires the .NET Framework 2.0 SP1 and the .NET Framework 3.0 SP1 to be present as prerequisites.) If .Net Framework 2.0 and 3.0 cannot be verified on your computer, you can try to follow the steps mentioned in the following blog to repair the .NET Framework 2.0 and 3.0 on Windows Vista.
    See: http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

    If no avail, could you please try to use collect tool to collect the log files of .NET Framework 3.5 sp1 from your "%temp%" folder?
    http://blogs.msdn.com/heaths/archive/2008/05/09/visual-studio-and-net-log-collection-utility.aspx
    Steps:
    - Try to clean your "%temp%" folder
    - Install .NET Framework 3.5 sp1 (The installer must be run with administrator privileges - Right click the installer >> Click "Run as administrator")
    - Collect the logs from "%temp%" folder
    - Upload vslogs.cab file
    You can upload your log files to SkyDrive and post the link back here.

    In addition, here is a another similar post you may refer to. Pay attention to Soulsedge part.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Send us any feedback you have about the help from MSFT at fbmsdn@microsoft.com.
    Monday, October 19, 2009 1:41 AM

All replies

  • Hello,

    Error code 34 typically indicates that a reboot is needed, try rebooting your system and run setup again.

    If the issue still exists, try download it manually and reinstall to see if helps.

    What is your OS? If it is vista or later, Check whether you have turned on the windows feature of .NET Framework. (Please go to Control Panel -> Programs and Features -> Turn Windows features on or off -> Check the box next to Microsoft .NET Framework)

    Use Verification Tool to verify .Net Framework 2.0, 3.0, 3.5.(The .NET Framework 3.5 is an add-on that requires the .NET Framework 2.0 SP1 and the .NET Framework 3.0 SP1 to be present as prerequisites.) If .Net Framework 2.0 and 3.0 cannot be verified on your computer, you can try to follow the steps mentioned in the following blog to repair the .NET Framework 2.0 and 3.0 on Windows Vista.
    See: http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

    If no avail, could you please try to use collect tool to collect the log files of .NET Framework 3.5 sp1 from your "%temp%" folder?
    http://blogs.msdn.com/heaths/archive/2008/05/09/visual-studio-and-net-log-collection-utility.aspx

    You can upload your log files to SkyDrive and post the link back here.

    Steps:
    - Try to clean your "%temp%" folder
    - Install .NET Framework 3.5 sp1 (The installer must be run with administrator privileges - Right click the installer >> Click "Run as administrator")
    - Collect the logs from "%temp%" folder
    - Upload vslogs.cab file

    In addition, here is a another similar post you may refer to. Pay attention to Soulsedge part.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Send us any feedback you have about the help from MSFT at EMAIL GONE.
    Tuesday, October 13, 2009 7:29 AM
  • Hello,

    Error code 34 typically indicates that a reboot is needed, try rebooting your system and run setup again.

    If the issue still exists, try download it manually and reinstall to see if helps.

    What is your OS? If it is vista or later, Check whether you have turned on the windows feature of .NET Framework. (Please go to Control Panel -> Programs and Features -> Turn Windows features on or off -> Check the box next to Microsoft .NET Framework)

    Use Verification Tool to verify .Net Framework 2.0, 3.0, 3.5.(The .NET Framework 3.5 is an add-on that requires the .NET Framework 2.0 SP1 and the .NET Framework 3.0 SP1 to be present as prerequisites.) If .Net Framework 2.0 and 3.0 cannot be verified on your computer, you can try to follow the steps mentioned in the following blog to repair the .NET Framework 2.0 and 3.0 on Windows Vista.
    See: http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

    If no avail, could you please try to use collect tool to collect the log files of .NET Framework 3.5 sp1 from your "%temp%" folder?
    http://blogs.msdn.com/heaths/archive/2008/05/09/visual-studio-and-net-log-collection-utility.aspx

    You can upload your log files to SkyDrive and post the link back here.

    Steps:
    - Try to clean your "%temp%" folder
    - Install .NET Framework 3.5 sp1 (The installer must be run with administrator privileges - Right click the installer >> Click "Run as administrator")
    - Collect the logs from "%temp%" folder
    - Upload vslogs.cab file

    In addition, here is a another similar post you may refer to. Pay attention to Soulsedge part.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Send us any feedback you have about the help from MSFT at EMAIL GONE.
    I am using Vista home premium 32-bit and reboot doesn't work and I am wondering if I need to have .Net Framework 2.0, installed? becuas I have at the momet only this one installed http://www.microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4E35-B531-508D977D32A6&displaylang=en
    Tuesday, October 13, 2009 2:13 PM
  • Hello,

    Windows Vista (all editions) includes the .NET Framework 2.0 and 3.0 as OS components, so usually it is not necessary to install them separately.

    You may try other steps I mentioned above. As you mentioned your OS is vista, you may first verify that you have turned on the windows feature of .net Freamework. (Please go to Control Panel -> Programs and Features -> Turn Windows features on or off -> Check the box next to Microsoft .NET Framework, then click Ok). Then reinstall. If the problem still exists.

    If the issue still exists, use Verification Tool to verify .Net Framework 2.0, 3.0, 3.5.(The .NET Framework 3.5 is an add-on that requires the .NET Framework 2.0 SP1 and the .NET Framework 3.0 SP1 to be present as prerequisites.) If .Net Framework 2.0 and 3.0 cannot be verified on your computer, you can try to follow the steps mentioned in the following blog to repair the .NET Framework 2.0 and 3.0 on Windows Vista.
    See: http://blogs.msdn.com/astebner/archive/2007/03/26/how-to-repair-the-net-framework-2-0-and-3-0-on-windows-vista.aspx

    If no avail, could you please try to use collect tool to collect the log files of .NET Framework 3.5 sp1 from your "%temp%" folder?
    http://blogs.msdn.com/heaths/archive/2008/05/09/visual-studio-and-net-log-collection-utility.aspx
    Steps:
    - Try to clean your "%temp%" folder
    - Install .NET Framework 3.5 sp1 (The installer must be run with administrator privileges - Right click the installer >> Click "Run as administrator")
    - Collect the logs from "%temp%" folder
    - Upload vslogs.cab file
    You can upload your log files to SkyDrive and post the link back here.

    In addition, here is a another similar post you may refer to. Pay attention to Soulsedge part.


    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Send us any feedback you have about the help from MSFT at fbmsdn@microsoft.com.
    Monday, October 19, 2009 1:41 AM