locked
lost password

    Question

  • my password and secret question won't work and i never set up an alternate email how can i get my account back. i'm using an old account to post this.

    Tuesday, May 27, 2008 2:30 AM

Answers

  • Try Login Recovery, which is a free service to reveal user names and recover passwords for Windows NT, 2000, XP, 2003 and Longhorn. As long as you have physical access to the computer, your passwords can be recovered. http://www.loginrecovery.com

     

     

    If you can't gain access to the Internet from your computer, then follow the steps listed below, which were copied from the following: http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=305 on 30 Aug 08

     

    "Can't Log On to Windows XP?

    If that’s your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access hole in Windows XP.

    This method is easy enough for newbies to follow – it doesn’t require using the Recovery Console or any complicated commands.

    1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)

    2. Keep your eye on the screen messages for booting to your cd Typically, it will be “Press any key to boot from cd”

    3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

    4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now

    5. The Licensing Agreement comes next - Press F8 to accept it.

    6. The next screen is the Setup screen which gives you the option to do a Repair.

    It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair it”

    Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.

    7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

    8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”

    9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.

    10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.

    11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.

    12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).

    13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

    I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem."

    Saturday, August 30, 2008 11:22 PM

All replies

  • Try Login Recovery, which is a free service to reveal user names and recover passwords for Windows NT, 2000, XP, 2003 and Longhorn. As long as you have physical access to the computer, your passwords can be recovered. http://www.loginrecovery.com

     

     

    If you can't gain access to the Internet from your computer, then follow the steps listed below, which were copied from the following: http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=305 on 30 Aug 08

     

    "Can't Log On to Windows XP?

    If that’s your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access hole in Windows XP.

    This method is easy enough for newbies to follow – it doesn’t require using the Recovery Console or any complicated commands.

    1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)

    2. Keep your eye on the screen messages for booting to your cd Typically, it will be “Press any key to boot from cd”

    3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

    4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now

    5. The Licensing Agreement comes next - Press F8 to accept it.

    6. The next screen is the Setup screen which gives you the option to do a Repair.

    It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair it”

    Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.

    7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.

    8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”

    9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.

    10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.

    11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.

    12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).

    13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

    I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem."

    Saturday, August 30, 2008 11:22 PM
  • I JUST PURCHASED THIS LAPTOP ABOUT TWO WEEKS AGO, AND HAVE HAD CONSTANT PROBLEMS LOGGING IN USING MY PASSWORD. IT USED TO TAKE 2-3 TIMES BEFORE IT WOULD LET ME LOG IN, AND NOW IT WILL NOT ACCEPT MY PASSWORD. I AM ABOUT TO SEND THIS LAPTOP BACK!!!!

     

    CAN YOU HELP?

     

    NEIL

    Sunday, September 28, 2008 6:44 PM