Error 25015 while installing .NET Framework 2.0

Question

Hi,

I have a problem getting NetFX 2.0 installed.

While installing the framework with Elevated Rights I get :

Error 25015: Failed to install assembly 'C:\WINNT\Microsoft.NET\Framework\v2.0.50727\Microsoft.VisualBasic.Vsa.dll' because of a system eror: Access is denied.

If I give the user admin rights the installation works fine.

Is there a way to get around the admin rights, I really dont want to get it to all 2000 users on our site :-)

 

/// Johan

Answer 1

You need to be an admin to install the framework.

If you're deploying the framework via SMS or active directory, follow the steps in the admin deployment guide.

The admin gude is in the \setup folder of VS.  It's called adminreadme.htm

Answer 2

I am suffering the same problem, and I logged in as an admin

Answer 3

Anyone find a solution to this yet? We've been tring for months and nothing works.

 

Answer 4

Can you zip up the installation logs in your %temp% directory and send me an email from my blog?

http://blogs.msdn.com/quanto

I'll reply with an email you can send the logs to.

Thanks.

Answer 5

This should fix it:

http://blogs.msdn.com/quanto/archive/2006/03/31/566191.aspx

 

Answer 6

Sorry, But I don't see how that is helpful.

Unless I got a bad link.

I am an administrator, and I don't have the service referenced installed.  I do have Symantec Anti-virus.

 

I could use any help.

 

Thanks, Brian

Answer 7

Hi everybody.  I'm sorry but I just want to have my PDA working again.  I keep on getting this message

Error 25015. Failed to install assembly ‘C:\WINDOWS\Microsoft.NET\Framework\v2.050727\Microsoft.VisualBasic.Vsa.dll’because of system error: 0x80131107.  

Can somebody help? please I'm desperate !

Answer 8

Hi everybody.  I'm sorry but I just want to have my PDA working again.  I keep on getting this message

Error 25015. Failed to install assembly ‘C:\WINDOWS\Microsoft.NET\Framework\v2.050727\Microsoft.VisualBasic.Vsa.dll’because of system error: 0x80131107.  

Can somebody help? please I'm desperate ! .  You may contact me at [e-mail]

Answer 9

Hey Whats up im Luis and i cant understand how to solve this problem. please can someone help me?

Answer 10

Hi,

I got the same problem while I was installing it. I went to the

"C:\WINDOWS\Microsoft.NET\Framework"

directory and deleted the

"v2.050727"

folder. Afterwards I just reinstalled it and no problem anymore. Hope this will also work in your case

Ciao

Landero

Answer 11

 

B.I.N.G.O

 

Thank you landero 2 weeks of trying to figuer it out and boom install niceley

thank you so much

 

Regards jam201984

Answer 12

Grazie Landero! senza il tuo utilissimo consiglio non sarei mai riuscita a d installare Autocad!

Grazie infinitamente!

ero arrivata alla frutta ma per fortuna ho incontrato il tuo messaggio!

Thank you!

Gogo

Answer 13

could someone say if, after trying my solution, he or she is still coping with the same problem?

or is it solved? If not I will try to find an other solution.

 

Thanks

Landero

 

Answer 14

Hi Landero,

Same problem here.
Also after I deleted folder "C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727".

Anyone who could help me out?


Edit:

I've downloaded the dotnetfx_cleanup_tool and I used it, now I can install all frameworks, 1.1, 2.0, 3.0 and higher.

Download it here: http://astebner.sts.winisp.net/Tools/dotnetfx_cleanup_tool.zip

Answer 15

Thanks Landero  worked great!!!!!!

 

Answer 16

 

I'll try to find something else for you Rulez....

Answer 17

Thank you!  I have been fighting this for two days. Neither Microsoft support nor Dell could help me. Thank you!

Answer 18

One of the following workarounds might be helpful for this type of error:

 

http://blogs.msdn.com/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx

 

http://blogs.msdn.com/astebner/archive/2006/11/25/disabling-services-with-msconfig-to-work-around-setup-failures.aspx

 

Thanks!  Aaron

 

Answer 19

Go to

C:\WINDOWS\Microsoft.NET\Framework             

and then delete this file v2.0.50727 and the try the intall again it helped for me

Answer 20

I found this post whilst looking for the reason .NET 2.0 Framework was failing to install.

 

All I did to make it work was temporarily disable my antivirus for the install duration - and it worked fine!  Not the most elegant solution, I agree, but it seems to work - unusual as MS usually put something in at the start regarding disabling AV software if you're required to do so.

 

Ah well - installed and the world is a happy place once more!

Answer 21

Really thanks，Landero!

I had fixed the same problem.

Answer 22

 

Thanks a lot Landero...Fix my problem and headache

Answer 23

Landro, pure genius....works great!!!

Answer 24

Thanks for saving me hours and not being angry at my dogs.

Answer 25

Thanks, Landero!

 

That took care of the problem.

 

Answer 26

oh realy you fixed the problem right i knew the awnser all ready to your fix anit to hard

Answer 27

What do you mean, "Afterwards I just reinstalled it...."?  I need directions on "reinstalling" it.

Answer 28

Hi Mordido,

 

"I got the same problem while I was installing it. I went to the

"C:\WINDOWS\Microsoft.NET\Framework"

directory and deleted the

"v2.050727"

folder. Afterwards I just reinstalled it and no problem anymore.

 

 

with that "afterwards...." i meant that you just rerun your setup, or how should i call it... just run the  '.net Framework 2.0' setup if you got that one in a separate file. if not you can always download it (ill give you the link http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5 (english file but you can switch the language)

 

Hope this will help you to fix your problem

 

Ciao

landero

 

 

Answer 29

HEY THERE RULEZ!

 

THANK U SO MUCH FOR YOUR ADVICE AND LINK FOR THE CLEAN UP TOOL!!

I HAVE BEEN TRYING TO INSTALL 4OD FOR MONTHS NOW AND AT THE LAST MOINUTE IT STOPPING DUE TO ERROR 25015 FAILURE TO INSTALL NET. FRAMEWORK ETC ETC!!

I FOLLOWED UR ADVICE AND LINK AND INSTALLED IT SUCESSFULLY!!

THANK U !

Answer 30

Worked tremendously.  It was driving me crazy, the drivers and software for my ATI 1950Pro graphics card would not install properly and gave numerous errors because of this simple problem.

 

Thank you so very much for finding the solution, I cannot begin to express how much I appreciate it.

 

Cheers,

Oth

 

http://Othello-3D.deviantart.com/gallery

Answer 31

 

Landero...  You are the man! That's the ticket.  Simple but effective solution

 

Don Heinsen

Answer 32

thanks mate. saved me a  lot of trouble
cheers 

Answer 33

I had the same problem trying to install framework 2 0r 3 and deleted the v2.050727 folder and everything worked fine.  Thank you very much

 

Answer 34

I'm trying to install this yet >Error 25015: Failed to install assembly 'C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Vsa.dll' because of system error: The system cannot find the path specified< keeps popping...

Tried landero's suggestion and the clean up tool yet both failed. Any other solutions?

Answer 35

I tried the suggestions of Landero and any combination thereof for a while, sure I have some corupted files here and there from my last hdd crash. I tried:

 

Erasing:  C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727

Clean Up: dotnetfx_cleanup_tool

Running dotnetfx from a C:\temp directory

Erasing the content of one of my \TEMP directories 

 

Just before giving up I tried the suggestion of Aaron Stebner Solving setup errors by using the SubInACL tool to repair file and registry permissions. I downloaded the Windows Resource Kit named SubInACL, see

 

http://blogs.msdn.com/astebner/archive/2006/09/04/solving-setup-errors-by-using-the-subinacl-tool-to-repair-file-and-registry-permissions.aspx

 

So I ran: SubInAcl, erased: \Framework\v2.0.50727, ran: dotnetfx_cleanup_tool, finally: dotnetfx from the C:\temp and it worked. Thanks for keeping the tread alive, owe you a pizza all of your!

Answer 36

My Error 25015 said "device not ready", before I ran the cleanup tool.  Now Framework 2.0 is installed.  Thanks, Rulez.

Answer 37

Thank you very much Lanredo, this was the solution to the problem.

Answer 38

Thanks Landero,

  It worked beautifully.  I need to install the updates now

 

Answer 39

omg i struggled with this for the last 48 hours after using hp pc system recovery to restore my computer to its original factory settings and drivers. after this i reupdated windows xp through windows update. then i downloaded dotnerframe work 2.0 because i needed to install my ati hd2600xt agp card but it didn't want to. to many errors. googled it and finally came across with Landero's solution. thanx

Answer 40

Hi,

I got the same problem while I was installing it. I went to the

"C:\WINDOWS\Microsoft.NET\Framework"

directory and deleted the

"v2.050727"

folder. Afterwards I just reinstalled it and no problem anymore. Hope this will also work in your case

Ciao

Landero

This worked perfect for me thank you

Answer 41

 

Just want to say that Zicc's method worked for me when all else (deleting the folder as suggested by another user) failed. Cheers

Answer 42

Just a thanks to Lando...this was THE answer

Answer 43

Hi Landero,

same problem but cannot delete v2.0.50727

popup says cannot delete TBD1E tmp  ...access is denied. Make sure sidc is not full or write protected or currently in use.

Does it make any difference if NET framework 1.1 is deleted before u start or after, or don't u delete it t all.

 It won't let me delete it anyway.

hope u will reply

 kind regards

demondee

Answer 44

 

THAT WORKED FOR ME.  THANKS

Answer 45

deleted the

"v2.050727"

Thanks! That fixed my problem!   I wasted many hours before I noticed your post!

-Don-

                                     

Answer 46

After hours of trying things to fix this problem with no luck, I found this forum and a simple little delet and reinstall fixed the problem.

 

Thanks

Answer 47

hi

I had the same problem like you, And I TRIED EVERYTHING TO GET IT SORTED BUT NOTHING THEN I TRIED WHAT YOU SAID AND IT WORKED I CANT THANK YOU ENOUGH,

got the same problem while I was installing it. I went to the

"C:\WINDOWS\Microsoft.NET\Framework"

directory and deleted the

"v2.050727"

 

 

THANKS SWEETLUSH

 

Answer 48

HI I HA THE SAME PROBLEM AND COULD NOT FIND ANYTHING THAT WORKED AND THEN I TRIED WHAT YOU SAID ANDI went to the

"C:\WINDOWS\Microsoft.NET\Framework"

directory and deleted the

"v2.050727"

AND THEN REINSTALLED IT. AND IT WORKED FIRST TIME I DONT KNOW HOW TO THANK YOU ENOUGH.

 

 

THANKS THANKS THANKS

 

SWEETLUSH I GIVE YOU 5***************************

Answer 49

I have been struggling with this problem for days.  I tried several other recommendations.  This was the first that worked.  Thanks!!!!!

 

Answer 50

kept getting an error that different files during the install were being used, disabled my security suite Comodo and it installed!

ty for the advise

Answer 51

I got the error 25015 problem during a crashed installation of dotnet 3.5

I tried all the solutions given but nothing worked. Removal tool, renaming dir's, the subinacl tool, removing dll's, Aaron Stebners wisdom and more.

In the end i tried a rollback (system restore) to a previous state BEFORE i installed dotnet. This worked. There is some software i had to reinstall because of the rollback, but this still is a lot better than installing xp again.
Maybe this solution is to obvious so no one mentioned it before, but it saved me al lot of trouble.

cheers,

G.

ps making images of your configuration more often is also a good idea (in retrospect)

Answer 52

I got the same error (Error 25015. Failed to install assembly ‘C:\WINDOWS\Microsoft.NET\Framework\v2.050727\Microsoft.VisualBasic.Vsa.dll’because of system error: 0x80131107) when installing 2.0 .NET framework.

 

Deleting the directory v2.050727 helped me solve the problem. Thank you for that great suggestion.

Answer 53

Thank you Landero. For some reason, I ran into this problem when trying to load TurboTax, which tried to install .NET. It was great to find this easy solution.

Answer 54

 

I used the link you provided and was then able to download .net framwork 2.0 without any problems.

Thanks!!!

Answer 55

I wanted to thank you for sharing that tip! I really helped me out a lot.
 so a great big hug and kiss for you ;-)


Thanks,
Kathy

Answer 56

Hey Landero... I tried your method and it worked on solving the error. BUT BEFORE I SAY THIS NO-ONE LAUGH, the second i did that and retried installation, it switched from one error to the next, first the error 0x80131107 then access is denied... When i saw that i tried all other methods, the one by aaron failed. I don't know why, instead of the software giving me elevated rights nothing happened. Cleanup tool did nothing, same goes for MSCONFIG method, and all the other numerous things. I even disable antivirus but to no luck. If there is anyone ot there who can fix my problem, you deserve to own microsoft, their software is good but too many errors.

Answer 57

HI i am trying to install MS .net frame work 2

i am getting the following error msg

Error 25015. Failed to install assembly ' C:\WINDOWS\Microsft.NET\Framework\V2.0.50727\Microsoft.VisualBasic.Compatibility.dll" because of system error: 0x80131107

please advice.

Thanks,

vineel

Answer 58

Thank you Landero, I deleted the folder you mentioned and it work form me... I reallay appreciate all of you guys for posting solutions for some of us who really would not know what to do..

Thanks a million.

Answer 59

Hey!
After three hours of misery I did this and it worked! YAHOO! THANK YOU, THANK YOU THANK YOU!

Answer 60

You rule man thanks a ton

cheers!!!
Aman Dass

Answer 61

This did not work on my system. I am running Windows XP media center.

Answer 62

This is for Vista only

Answer 63

I tried to do it thee way you suggested, but then I get another error message saying that the file for c:\windows\microsoft.net\framework cannot be found, and I have also tried to reinstall it and it still won't let me.  The reason I am working with the framework is because I had printer problems.  Everytime I would try to install a printer, it would come up saying the print processor is not available.  Then when I would try to download and install this, it would come up saying that the .net framework cannot be located.

Please somebody help me install the .net framework file and also the print processor.  Thank you all so very much.

Stevie

Answer 64

Thank you,worked perfectly.