none
ntldr missing

All replies

  • go to BIOS and enable key looger

     

    Wednesday, October 27, 2010 4:38 PM
  • HOW CAN I WHEN I TURN COMPUTER ON IT DOES NOT BOOT UP SCREEN SAYS NTLDR IS MISSING PRESS CTR ALT DEL TO RESTART AND KEY BOARD DOE NOT RESPOND.
    Wednesday, October 27, 2010 11:02 PM
  • I found this for you. I copy/paste from this website.

    http://www.computerhope.com/issues/ch000465.htm

    NTLDR is Missing.

    Issue:

    NTLDR is Missing.

    <big><big>Related errors:</big></big>

    Below are the full error messages that may be seen when the computer is booting.

    NTLDR is Missing
    Press any key to restart

    Boot: Couldn't find NTLDR
    Please insert another disk

    NTLDR is missing
    Press Ctrl Alt Del to Restart

    Causes:

    1. Computer is booting from a non-bootable source.
    2. Computer hard disk drive is not properly setup in BIOS.
    3. Corrupt NTLDR and/or NTDETECT.COM file.
    4. Misconfiguration with the boot.ini file.
    5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
    6. New hard disk drive being added.
    7. Corrupt boot sector / master boot record.
    8. Seriously corrupted version of Windows 2000 or Windows XP.
    9. Loose or Faulty IDE/EIDE hard disk drive cable.
    10. Failing to enable USB keyboard support in the BIOS

    ..............................................................................

     There are solutions and more information on the website.

      check it out.

       Hope this helps.

     

    Friday, October 29, 2010 1:29 PM
  • Error: System Restore is not able to protect your computer. Please restart your computer
    System Restore is not able to protect your computer. Please restart your computer.

    SUMMARY

    This article provides the resolution of the error

    'System Restore is not able to protect your

     computer. Please restart your computer.

    Then run system restore again'.

    1. Click on Start then click on My Document
    2. Click on Tools then click on Folder Options
    3. Click on View tab then uncheck
    4. Hide extensions for known file types
    5. Click on Apply then click on OK
    6. Click on Start then click on Run
    7. Type %Windir%\INF then click on OK
    8. Right click on sr.inf file then click on Install
    9. If the Files Needed window appears,
    10. click on Browse
    11. Select the required file

      Note: The i386 folders on the Windows XP CD.
    12. Click on OK then complete the remaining installation
    13. Restart the computer



    The information in this article applies to:
    • Windows XP


    error system restore not able protect computer please restart xp windows

    Microsoft Windows XP Professional
    Sunday, January 16, 2011 8:01 PM
  • NO Optical drive in my computer

    1. Close all open programs
    2. Click on Start, Run, and type REGEDIT and press Enter
    3. Click on the plus signs (+) next to the following folders:

    HKEY_LOCAL_MACHINE
    SYSTEM
    CurrentControlSet
    Control
    Class
    {4D36E965-E325-11CE-BFC1-08002BE10318}

    4. This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

    UpperFilters
    LowerFilters
    UpperFilters.bak
    LowerFilters.bak

    5. If any of the above keys shown in step 4 are listed, right-click on them and choose Delete
    6. After deleting the keys, close the Registry Editor
    7. Reboot your computer
    8. Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone. Also, be sure to check under Computer to make sure the CD/DVD drive is visible.

     

    Monday, January 17, 2011 8:38 PM
  • Error: Windows cannot find regsvr.exe
     
    1. Click Start and then click Run
    2. Type Regedit and then press Enter
    3. Locate the following key:

      HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCurrentVersionWinlogon

    4. On the right pane look for Shell
    5. Double Click the Shell registry value. You can find 'Explorer.exe regsvr.exe' in the Value data field.
    6. Delete regsvr.exe alone and click OK.

      Note: Make sure that you don't delete Explorer.exe from the Shell registry.
    7. Close the registry editor window
    8. Reboot the computer

    9. Thanks Enjoy Troubleshooting

     

    Monday, January 17, 2011 11:34 PM
  • Error:0X800C012E Outlook Express could not be started
    Error: Error MSOE.dll is missing Outlook Express could not be started. It may not be installed correctly

    Cause:

    Outlook Express could not be started. It may not be installed correctly. Once you click Ok, to the warning message it will display another error message stating Outlook Express Could Not Be Started Because MSOE.DLL Could Not Be Loaded.


    This generally happens when DBX files attributes are changed to read only.


     



    Solution:

    SUMMARY

    This article describes about an error 0X800C012E in Outlook Express.

    1. Click Start and then click Search
    2. Click For Files and Folders
    3. Click All Files and Folders
    4. Select the drive C:
    5. *. DBX in the search box and then click Search button
    6. On the right side it will display the search result
    7. Right click the DBX files and then click Properties
    8. Uncheck Read Only box and then click Ok
    9. Follow the process for all the DBX files listed in the search result wind

    Note: If Windows is unable to find specified Files the follow

    C:\Documents and Settings\Administrator\Local Settings\Application Data\Identities\{7E96CBC6-8054-474C-BA45-AAF7328677AE}\Microsoft\Outlook Express 

    Tuesday, January 18, 2011 12:05 AM
  • Unable to install Microsoft Security Essentials
    Symptoms:

    Solution:

    SUMMARY

    This article describes how to fix the issue of not installing the Microsoft Security Essentials.

    Step 1: Remove the installed Internet Security Software

    1. Click Start and then click on Run
    2. Type appwiz.cpl and then Click OK
    3. Select the installed program and click on Remove
    4. Restart the computer and try to install Microsoft Security Essentials

    Step 2: Ensure Windows Installer service is running

    1. Click Start and then click Run
    2. Type services.msc and press Enter
    3. Right-click on Windows Installer and then click Start
    4. Click OK
    5. Click File and then click on Exit
    6. Click Start and then click on Run
    7. Type cmd and press Enter
    8. Type msiexec /regserver and press Enter
    9. Try to install Microsoft Security Essentials

    Step 3: Start Windows in Selective Startup mode

    1. Click Start and then click Run
    2. Type msconfig and press Enter
    3. Click on General tab
    4. Click Selective Startup and uncheck Load Startup Items
    5. Click on Service tab, and check mark on Hide All Microsoft Services
    6. Uncheck all the other options except Hide All Microsoft Services
    7. Click OK and then click on Restart
    8. Try to install Microsoft Security Essentials

    Note: "If you are getting error thet Windows Installer 3.1 is missing the please install

                 In by Following Link: http://www.microsoft.com/downloads/en/details.aspx?familyid=889482fc-5f56-4a38-b838-de776fd4138c&displaylang=en

     

     

    Method 2

    Step 2: Make sure the Windows Installer service is running

    1. In Windows XP, click Start , click Run , type services.msc , and then press ENTER .

      –or–

      In Windows Vista or Windows 7, click Start , click in the Start Search box, type services.msc , and then press ENTER .

    2. Right-click Windows Installer , and then click Start . If Start is unavailable and the Stop and Restart options are available, the service is already started.

    3. In the Services window, on the File menu, click Exit .

    4. In Windows XP, click Start , click Run , type cmd , and then press ENTER .

      –or–

      In Windows Vista or Windows 7, click Start , click in the Start Search box, and then type command prompt . Right-click Command Prompt , and then click Run as administrator .

    5. Type MSIEXEC /REGSERVER and then press ENTER . Note that there will be no indication that this command has succeeded or failed.

    6. Try to install Microsoft Security Essentials again.

    Step 3: Start Windows in Selective Startup mode

    1. In Windows XP, click Start , click Run , type msconfig , and then press ENTER .

      –or–

      In Windows Vista or Windows 7, click Start , click in the Start Search box, type msconfig , and then press ENTER .

    2. In the General tab, click Selective Startup , and then clear the Load Startup Items check box.

    3. On the Services tab, select the Hide All Microsoft Services check box, and then clear all the check boxes for the services that remain in the list.

    4. Click OK , and then click Restart to restart the computer.

    5. Try to install Microsoft Security Essentials again.

     

    Tuesday, January 18, 2011 12:14 AM
  • hikhb

    1. bmb,,mn
    Wednesday, March 09, 2011 2:20 PM